MOT Status
ExpiredMileage
39,329 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust system not adequately supported (7.1.1)
Front Brake pipe inadequately clipped out of master cylinder under bulk head (3.6.B.1)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Seat belt anchorage prescribed area is excessively corroded B piller (5.2.6)
Nearside Front Subframe mounting prescribed area is excessively corroded chassis (2.4.A.3)
Nearside Front Wheel fitment excessively worn between the wheel and hub spigot mounting (4.2.B.5)
Nearside Front Wheel insecure (4.2.A.1c)
Nearside Front Wheel nut(s) loose (4.2.A.1e)
Nearside Headlamp aim too high and too far to the right. (1.8)
Nearside Rear Brake pipe inadequately clipped on axle (3.6.B.1)
Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush (2.4.B.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside front brake excessively fluctuating (3.7.B.3)
Nearside front parking (secondary) brake grabbing severely (3.7.B.6b)
Offside Headlamp aim too high (1.8)
Offside Rear Brake pipe inappropriately repaired on axle wrong side of leaf spring (3.6.A.3)
Offside Rear Leaf spring has excessive wear in a shackle pin and/or bush (2.4.B.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis (2.4.A.3)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Service brake: efficiency below requirements (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
front brake application uneven (3.7.B.2)
front brakes release unevenly (3.7.B.4)
all four shock absorbers weak in operation
oil leak
this vehical is in general poor condition
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front front brake binding (3.7.B.1)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Front wheel bearing rough when rotated (2.5.A.2)
Offside Front Lower Steering locking device missing (2.2.C.1g)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Oil leak
Play in prop-shaft centre bearing
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Temporary fuel cap fitted
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Nearside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Play in prop-shaft centre bearing
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Temporary fuel cap fitted
Front Direction indicators not working (1.4.A.2c)
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Lower Ball joint inappropriately modified (2.2.C.1e)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear Direction indicators not working (1.4.A.2c)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Nearside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Play in prop-shaft centre bearing
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Centre Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Body has slight corrosion (6.1.B.2)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Vehicle structure has slight corrosion (6.1.B.2)
Nearside Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)
Offside Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Vehicle structure has slight corrosion (6.1.B.2)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Steering system has slight free play detected at steering wheel (2.2.A.1a)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Front Shock absorber has a serious fluid leak (2.7.3)
Fuel pipe/s corroded
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Engine/gearbox mounting(s) defective
Front Body has slight corrosion (6.1.B.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Body has slight corrosion (6.1.B.2)
Rear Shock absorber has a light misting of oil (2.7.3)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Oil leak
Direction indicators not in good working order (function impaired) (1.5.A1b)
Exhaust emits excessive dense blue smoke during acceleration (7.3.A.2c)
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)
Mechanical brake component has restricted free movement (3.5.1k)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Offside Front wheel bearing rough when rotated (2.5.A.2)
Offside Rear fog lamp not working (1.3.2b)
Offside Rear wheel bearing rough when rotated (2.6.1)
Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
corrosion through out structure
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front Steering component mounting prescribed area is excessively corroded (2.2.C.1h)
Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp not working on main beam (1.7.5a)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Front Windscreen wiper not operating automatically when switched on (8.2.1b)
Nearside Front Headlamp aim too low (1.8)
Offside Front Brake pipe inadequately supported (3.6.B.1)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Brake pipe inadequately supported (3.6.B.1)
How Reliable is the Bedford Camper?
Based on 3,544 MOT tests across 266 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YYA 96X is a 1981 Bedford Camper in White with a 2,279cc petrol engine. This vehicle has been through 12 MOT tests with a personal pass rate of 41.7%.
Across all 1981 Bedford Camper models, the average MOT pass rate is 62.3% with a typical mileage of 76,455 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Bedford Camper fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 135 recorded failures. If you're considering buying YYA 96X, it's worth having these areas checked by a mechanic before committing.
The Bedford Camper typically stays on UK roads for around 53 years. At 45 years old, this Bedford Camper is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YYA 96X?
You can check the full history of YYA 96X by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YYA 96X registered?
YYA 96X is a 1981 Bedford Camper, first registered on 4 August 1981.
Is YYA 96X safe to buy?
The MOT history for YYA 96X shows 12 tests with a 41.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YYA 96X have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YYA 96X. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.