2005 Mazda MX-5

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front hole in wing

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

various surface rust underneath

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))

Brake pipe excessively corroded front to rear. (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Brake pipe corroded, covered in grease or other material front to rear. (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Integral body structure is repaired but structural rigidity is not significantly reduced outer sill. (6.1.1 (d) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill, hole. (6.1.1 (c) (i))

Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced hole in outer sill. (6.1.1 (c) (i))

Rear Brake pipe excessively corroded rear pipe from offside joint to nearside hose. (1.1.11 (c))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill. (6.1.1 (c) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Outer Integral body structure is repaired but structural rigidity is not significantly reduced outer sill corroded around previous repair. (6.1.1 (d) (i))

Rear Brake pipe corroded, covered in grease or other material front to rear. (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis rail (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis rail (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis rail (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis rail (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Parking brake inoperative on one side (1.4.1 (a))

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)