2003 Triumph Speed Four

REAR BRAKE SWITCH COULD DO WITH ADJUSTMENT

Offside Headlamp aim too low (4.1.2 (a))

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Front Position lamp not working (4.2.1 (a))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps does not illuminate number plate due to position. (4.7.1 (b) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Chain guard missing ()

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Tyre worn close to the legal limit Near / on limit (5.2.3 (e))

Horn not working (7.7 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake lever has inadequate reserve travel (3.1.3b)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Nearside Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Offside Front Brake lever has inadequate reserve travel (3.1.3b)

Offside Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp aim too low (1.6)

Nearside Front Front position lamp does not illuminate immediately when switched on (1.1.3a)