MOT Status
ValidMileage
58,420 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Tyre slightly damaged/cracking or perishing starting to crack (5.2.3 (d) (ii))
Offside Front Tyre slightly damaged/cracking or perishing starting to crack (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing starting to crack (5.2.3 (d) (ii))
Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))
Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))
Rear Exhaust system insecure (6.1.2 (a))
Nearside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS
Brake pipe corroded, covered in grease or other material all brake pipes corroded but covered in wax oil (1.1.11 (c))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Brake pipe corroded, covered in grease or other material all brake pipes (1.1.11 (c))
Tyre slightly damaged/cracking or perishing all tyres (5.2.3 (d) (ii))
Brake pipe corroded, covered in grease or other material all original brake pipes (1.1.11 (c))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger area (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material all brake pipes covered in grease (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Upper Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Brake pipe excessively corroded brake pipe running along the fuel tank (1.1.11 (c))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Position lamp not working (4.2.1 (a))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Brake pipe excessively corroded main pipes over fuel tank (1.1.11 (c))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Nail in tyre ()
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake pad(s) wearing thin (3.5.1g)
Headlamps matched pair are not the same colour (1.7.6)
Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Parking brake: efficiency below requirements (3.7.B.7)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake pad(s) wearing thin 2mm (3.5.1g)
Offside Front Brake pad(s) wearing thin 2mm (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Brake pad(s) wearing thin 2mm (3.5.1g)
Offside Front Brake pad(s) wearing thin 2mm (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
How Reliable is the MG 6?
Based on 28,661 MOT tests across 2,640 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YX11 BBJ is a 2011 MG 6 in White with a 1,796cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 61.1%.
Across all 2011 MG 6 models, the average MOT pass rate is 73.6% with a typical mileage of 53,890 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a MG 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 191 recorded failures. If you're considering buying YX11 BBJ, it's worth having these areas checked by a mechanic before committing.
The MG 6 typically stays on UK roads for around 15 years. At 15 years old, this MG 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YX11 BBJ?
You can check the full history of YX11 BBJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YX11 BBJ registered?
YX11 BBJ is a 2011 MG 6, first registered on 22 June 2011.
Is YX11 BBJ safe to buy?
The MOT history for YX11 BBJ shows 18 tests with a 61.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YX11 BBJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YX11 BBJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.