2002 Fiat Motor Caravan

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

drivers door cheq strap deteriorating

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Outline marker lamp not working (4.2.1 (a) (ii))

Offside Rear Outline marker lamp not working (4.2.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

drivers door cheq strap deteriorating

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Exhaust mounting defective hanger not attached at pipework to silencer (6.1.2 (a))

Headlamp lens slightly defective nearside & offside (4.1.1 (b) (i))

Nearside Front Service brake fluctuating, but not excessively & offside front (1.2.1 (e))

Nearside Rear Suspension spring mounting prescribed area damaged but not considered excessive leaf spring anchor mount damaged (5.3.6 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Service brake fluctuating, but not excessively nearside & offside (1.2.1 (e))

corrosion to radiator support/front cross-member

exhaust rattle

Front Anti-roll bar pin or bush worn but not resulting in excessive movement nearside & offside (5.3.4 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. offside effort is lower than the nearside (1.2.1 (b) (i))

Headlamp lens slightly defective nearside & offside (4.1.1 (b) (i))

Rear Service brake fluctuating, but not excessively nearside & offside (1.2.1 (e))

Suspension component mounting repair covered in underseal Both side welding repairs covered in underseal (5.3.6 (a) (i))

corrosion to front inner wheel arch area's

corrosion to front sub-frame

exhaust rattle

parking brake lever has travel

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area's (McPherson strut mount prescribed area) - marked in chalk (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point/out-rigger (viewed through wheel arch) - marked in chalk (5.3.6 (a) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement nearside & offside (5.3.4 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. offside effort is lower than the nearside (1.2.1 (b) (i))

Headlamp lens slightly defective nearside & offside (4.1.1 (b) (i))

Rear Service brake fluctuating, but not excessively nearside & offside (1.2.1 (e))

corrosion to front inner wheel arch area's

corrosion to front sub-frame

exhaust rattle

parking brake lever has travel

Brake pipe corroded, covered in grease or other material all pipes covered in underseal (1.1.11 (c))

Exhaust has a minor leak of exhaust gases centre silencer front join (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened on limit now (1.1.14 (a) (ii))

Front Service brake fluctuating, but not excessively on limit now (1.2.1 (e))

Front Subframe mounting prescribed area is corroded but not considered excessive nearside and offside (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

front wiper blades poor

Brake pipe corroded, covered in grease or other material all pipes covered in underseal (1.1.11 (c))

Exhaust has a minor leak of exhaust gases centre silencer front join (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened on limit now (1.1.14 (a) (ii))

Front Service brake fluctuating, but not excessively on limit now (1.2.1 (e))

Front Subframe mounting prescribed area is corroded but not considered excessive nearside and offside (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

front wiper blades poor

nearside & offside front anti roll bar links deteriorating

rear exhaust outer skin deteriorating

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Headlamp has a product on the lens but not seriously reducing light output nearside & offside outer head lamp lenses are weathering (4.1.4 (b))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Suspension component mounting prescribed area is corroded but not considered excessive nearside & offside front chassis leg / outer rigger area's corroding (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive nearside & offside front inner wheel arch area's corroding (5.3.6 (a) (i))

centre exhaust section is rubbing on the body

front cross member area's corroding

nearside & offside front inner step area's corroding

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area's (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area's (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Rear Tyre has a lump, caused by separation or partial failure of its structure inner side wall marked in yellow (5.2.3 (d) (ii)) DANGEROUS

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Headlamp has a product on the lens but not seriously reducing light output nearside & offside outer head lamp lenses are weathering (4.1.4 (b))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Suspension component mounting prescribed area is corroded but not considered excessive nearside & offside front chassis leg / outer rigger area's corroding (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive nearside & offside front inner wheel arch area's corroding (5.3.6 (a) (i))

centre exhaust section is rubbing on the body

front cross member area's corroding

nearside & offside front inner step area's corroding

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

both sills/step sills slightly corroded

front chassis slightly corroded

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

both sills/step sills slightly corroded

front chassis slightly corroded

wipers smeary

Nearside Front Lower Anti-roll bar linkage worn and seriously weakened (2.4.G.1)

Parking brake: efficiency below requirements (3.7.C.1b)

Headlamps kick to o/s but taped up.

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Headlamp masks/converters fitted

Direction indicator incorrect colour (1.4.A.2f)

Headlamp aim beam image kick up to the offside (1.6.B1)