MOT Status
ExpiredMileage
150,962 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Both front wings corroded
Front Exhaust mounting defective Flex (6.1.2 (a))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear tyre stepped and cracked
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Oil leak ()
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Stop lamp not working (1.2.1b)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front All position lamps not working (1.1.A.3b)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear All position lamps not working (1.1.A.3b)
Nearside Stop lamp not working (1.2.1b)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
front brake disc's worn
Front Brake pad(s) wearing thin (3.5.1g)
Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on dipped beam (1.7.5a)
both front tyres treads low
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YS04 LLZ is a 2004 Mazda 3 in Blue with a 1,598cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 73.7%.
Across all 2004 Mazda 3 models, the average MOT pass rate is 73.9% with a typical mileage of 69,720 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying YS04 LLZ, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 22 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YS04 LLZ?
You can check the full history of YS04 LLZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YS04 LLZ registered?
YS04 LLZ is a 2004 Mazda 3, first registered on 30 April 2004.
Is YS04 LLZ safe to buy?
The MOT history for YS04 LLZ shows 19 tests with a 73.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YS04 LLZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YS04 LLZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.