2007 Mazda MX-5

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength innersill (5.3.6 (a) (i))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength innersill (5.3.6 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

DSC flashing

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

FRONT AND REAR SUIBFRAMES CORRODED

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FRONT SUBFRAME (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive REAR SUBFRAME (5.3.6 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Offside Rear Inner Floor excessively deteriorated Within 30cm of seatbelt/suspension mounting point. (6.2.4 (a) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

General underbody corrosion.

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension rod corroded but not seriously weakened (5.3.3 (b) (i))

Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Outline marker lamp not working (4.2.1 (a) (ii))

slight corrosion on all brake discs

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Both front tyres bold on outer edges.

Front Brake pad(s) wearing thin (3.5.1g)

o/s/f tyre cracking on outer wall.

Front Brake pad(s) wearing thin (3.5.1g)

Front brake discs worn/corroded on inner edge