MOT Status
ValidMileage
111,777 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive lower inner sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive lower inner sill (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive lower inner sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive lower inner sill (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
surface corrosion to allrear suspension components
Rear subframe undersealed
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is inadequately repaired outer sill (7.1.1 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area is inadequately repaired outer sill (7.1.1 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Rear subframe undersealed
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm 195/65/15 (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated cut (5.3.4 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated cut (5.3.4 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Rear of vehicle corroded
sill covers fitted
Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Rear of vehicle corroded
sill covers fitted
Fuel hose deteriorated (6.1.3 (c) (ii))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
underside of vehicle corroded
Fuel hose deteriorated (6.1.3 (c) (ii))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
underside of vehicle corroded
Offside Front Body panel corroded and likely to cause injury (6.2.1 (a) (i))
Offside Rear Suspension arm pin or bush excessively worn trailing arm (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Tyre tread depth below requirements of 1.6mm 195/65/15 (5.2.3 (e)) DANGEROUS
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Fuel hose deteriorated (6.1.3 (c) (ii))
Nearside Front Inner Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Obligatory mirror slightly damaged (3.3 (b) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive sills (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive sills (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
sill covers fitted
under side of vehicle corroded
Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Other passenger door cannot be opened from outside the vehicle (6.2.3 (a))
Offside Front Headlamp aim too low (4.1.2 (a))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Obligatory mirror slightly damaged (3.3 (b) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
sill covers fitted
underside of vehicle corroded
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
sill covers fitted
underside of vehicle corroded
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
underside of vehicle corroded
Front both tyres wearing on outer edges
Offside Rear Child Seat fitted not allowing full inspection of adult belt ()
underside of vehicle corroded
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Front both tyres wearing on outer edges
Offside Rear Child Seat fitted not allowing full inspection of adult belt ()
underside of vehicle corroded
Nearside Rear Nail in tyre ()
Nearside mirror cover missing
Rear number plate cracked
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Rear Nail in tyre ()
Nearside mirror cover missing
Offside Front Outer Tyre worn close to the legal limit edge (4.1.E.1)
Rear number plate cracked
Rear number plate damaged
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear number plate damaged
Battery insecure (1.9.1)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
rear number plate damaged
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
rear number plate damaged
Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)
Braking system leaking (3.6.A.1)
Offside Outer Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YR54 VKH is a 2004 Mazda 3 in Silver with a 1,598cc petrol engine. This vehicle has been through 34 MOT tests with a personal pass rate of 58.8%.
Across all 2004 Mazda 3 models, the average MOT pass rate is 73.9% with a typical mileage of 69,720 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying YR54 VKH, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 22 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YR54 VKH?
You can check the full history of YR54 VKH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YR54 VKH registered?
YR54 VKH is a 2004 Mazda 3, first registered on 29 September 2004.
Is YR54 VKH safe to buy?
The MOT history for YR54 VKH shows 34 tests with a 58.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YR54 VKH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YR54 VKH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.