2014 Kymco Pulsar

Clutch lever shortened (6.2.7 (b))

All position lamps not working (4.2.1 (a))

Exhaust has a major leak of exhaust gases hold and blowing (6.1.2 (a))

Footrest missing (6.2.12 (a))

Front All direction indicators not working (4.4.1 (a) (ii))

Front Headlamp insecure (4.1.1 (c))

Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Headlamp not working on main beam (4.1.1 (a) (ii))

Horn not working (7.7 (a) (ii))

Rear All direction indicators missing (4.4.1 (a) (ii))

Rear All direction indicators not working (4.4.1 (a) (ii))

Rear Brake component insecure no locking pin (1.1.21 (c))

Rear Stop lamp not working foot (4.3.1 (a) (ii))

Rear Stop lamp not working hand (4.3.1 (a) (ii))

Clutch lever shortened (6.2.7 (b))

Indicator tell tale inoperative (4.9.1 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front shock absorber seal failed and leaking oil (2.3.3)

Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Drive chain sprocket worn to excess (6.2.1e)

Front suspension has inadequate damping effect. (2.3.6c)

Rear suspension component loose TRAILING ARM BUSHES WORN (2.4.A.1a)

Stop lamp does not illuminate immediately a brake applies FRONT BRAKE (1.3.1a)

Front Handlebar deformed (2.1.1b)

Fuel cap does not fasten securely maintaining the sealing arrangement (7.2.2b)

Nearside Rear Drive chain fouling another component main stand rubbing chain (6.2.1d)

Nearside Rear Footrest missing (6.2.1a)

Offside Rear Footrest missing (6.2.1a)

Rear Rear reflector on motorcycle obscured (1.4.2b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Exhaust slightly deteriorated (7.1.1a)

Nearside Front Clutch lever shortened. (6.2.1g)

Nearside Rear Drive chain worn but not considered excessive (6.2.1e)

Offside Rear Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Wheel alignment slightly misaligned. (2.5.1)