2009 Cpi Sm 50

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Stop lamp not working (4.3.1 (a) (ii))

Front Brake binding but not excessively (1.2.1 (f))

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Floor brake test indicates a binding brake (3.3.C2c)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Nearside Rear Footrest missing (6.2.1a)

Rear Brake fluid reservoir leaking hydraulic fluid (3.2.B1e)

Rear Drive chain excessively tight (6.2.1d)

Rear Upper Rear suspension bush has excessive free play (2.4.A2a(i))

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Direction indicators flashing more than 120 times per minute (1.5.1c)

Headlamp aim too high (1.6)

Headlamp insecure (1.2.3b)

Rear Brake master cylinder has a seized master cylinder pivot. (3.2.B5)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Lower Rear mono-shock pivot worn but not excessive (2.4.B.4)