2016 Shineray Unknown

Front Brake binding but not excessively (1.2.1 (f))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Brake excessively binding (1.2.1 (f))

Nearside Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Registration plate does not conform to the specified requirements (0.1 (d))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Drive chain excessively loose (6.1.7 (c) (i))

Front Brake performance not tested front wheel insecure (1.2.1 (g))

Front Stop lamp not working (4.3.1 (a) (ii))

Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Front Wheel bearing has excessive play front wheel insecure, unable to inspect bearings (5.1.3 (a) (i))

Headlamp aim not tested (4.1.2 (b))

Headlamp insecure (4.1.1 (c))

Headlamp light intensity severely reduced (4.1.4 (a))

Horn not working (7.7 (a) (ii))

Nearside Front Direction indicator missing (4.4.1 (a) (ii))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Direction indicator missing (4.4.1 (a) (ii))

Rear Brake pedal is positioned so that the brake cannot be readily applied positioned wrong side of stop (brake pedal unable to move) (1.1.2 (d))

Rear Brake performance not tested rear wheel insecure (1.2.1 (g))

Rear Stop lamp not working switch not connected (4.3.1 (a) (ii))

Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Rear Wheel bearing has excessive play unable to inspect bearings due to insecure wheel (5.1.3 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Wheel alignment incorrect which adversely affects the steering (2.4 (a))

Brake has no recorded effort at a wheel front wheel loose, pushing brake pistons back (1.2.1 (a) (ii)) DANGEROUS

Brake pedal so insecure that the brake cannot be readily applied pedal not connected to master cylinder linkage (1.1.2 (e) (ii)) DANGEROUS

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Wheel more than one fixing loose all front wheel spindle clamp bolts loose (5.2.1 (a) (ii)) DANGEROUS

Front Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) DANGEROUS

Rear Brake cylinder insecurely mounted and braking performance affected only mounted with one bolt (1.1.16 (c) (ii)) DANGEROUS

Rear Brake disc insecure mounting bolts ground down (1.1.14 (a) (ii)) DANGEROUS

Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) DANGEROUS

Horn control insecure (7.7 (b))

Rear Mudguard insecure ()

Registration plate slightly loose (0.1 (a))

speedometer missing