2009 Cpi Sm 50

Suspension pin, bush or joint worn but not resulting in excessive movement rear shock lower bush (5.3.4 (a) (i))

Front Brake excessively binding (1.2.1 (f))

Front Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (i))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Rear Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (i))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Horn not loud enough to be heard by another road user (7.7 (c) (i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings are excessively rough (2.3.5b)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp insecure (1.2.3b)

Lower Rear suspension bush has excessive free play (2.4.A2a(i))

Nearside Rear Direction indicator insecure (1.5.3b)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Rear Footrest missing (6.2.1a)

Rear reflector on motorcycle missing (1.4.1)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear wheel bearings are excessively rough (2.4.A.2c)

Rear wheel bearings have excessive free play (2.4.A.2c)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Clutch lever shortened. (6.2.1g)

Drive chain slightly tight (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

chain dry of lube

gear lever slightly bent

horn insecure

no mirrors fitted

Front wheel bearings have excessive free play (2.3.5b)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Rear Direction indicator missing (1.5.1a)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear wheel bearings have excessive free play (2.4.A.2c)

Drive chain worn but not considered excessive (6.2.1e)

Front Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front wheel bearings are excessively rough (2.3.5b)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear reflector on motorcycle missing (1.4.1)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear reflector on motorcycle missing (1.4.1)