2006 Rieju RS2

Chain guard missing ()

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Motorcycle structure is fractured but structural rigidity is not significantly reduced headlight bracket (6.1.1 (a) (i))

Nearside Front Shock absorber has a light misting of oil fork leg (5.3.2 (b))

front tyre slightly perrished

gear lever slightly damaged

slight oil leak

Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Stop lamp does not illuminate immediately a brake applies front control (1.3.1a)

Front Roller brake test indicates a sticking brake (3.3.A1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Roller brake test indicates a binding brake (3.3.A1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain worn to excess (6.2.1e)

Front Drive chain sprocket worn to excess (6.2.1e)

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Front Stop lamp does not emit a steady light (1.3.1b)

Fuel system component leaking (7.2.1a)

Headlamp aim too high (1.6)

Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Stop lamp does not emit a steady light (1.3.1b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Wheel alignment slightly misaligned. (2.5.1)