2003 Triumph Sprint

Front Shock absorber has a light misting of oil (5.3.2 (b))

Front Shock absorber has a light misting of oil Both nearside and offside (5.3.2 (b))

Shock absorber has a light misting of oil nearside and offside front (5.3.2 (b))

rear brake has little reserve travel

slight oil leak from nearside engine cover

slight travel in front brake leaver

Headlamp light intensity reduced (4.1.4 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake binding but not excessively (1.2.1 (f))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Brake binding but not excessively (1.2.1 (f))

Horn not working (7.7 (a) (ii))

Brake disc(s) slightly worn (3.2.A1l)

Brake pad(s) close to minimum limit front pads close to minimum on right hand side. close to fail. (3.2.A1f(i))

Fairings insecure but not likely to impede the steering front fairings damaged but do not impede steering. (2.1.2e)

Rear suspension bearing has slight free play (2.4.A2a(i))

slight oil leak from stator cover.

Tyre valve stem damaged which could cause sudden tyre deflation rear metal valve retaining nut severely damaged. (4.1.2c)

Footrest insecure front left riders foot peg missing its c clip. (6.2.1a) DANGEROUS

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4) DANGEROUS

Brake disc(s) slightly worn (3.2.A1l)

Brake pad(s) close to minimum limit front pads close to minimum on right hand side. close to fail. (3.2.A1f(i))

Fairings insecure but not likely to impede the steering front fairings damaged but do not impede steering. (2.1.2e)

Rear suspension bearing has slight free play (2.4.A2a(i))

slight oil leak from stator cover.

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Front Headlamp aim too low (1.6)

Front Hydraulic brake control feels spongy (3.1.4a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

front tyre tread depth 1.2mm