2007 Piaggio X8

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Nearside mirror missing

Central Front Upper Steering headbearing has slight free play (2.2.2 (f) (i))

Offside Front Upper Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front front brake lever snapped

Front Brake binding but not excessively (1.2.1 (f))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Shock absorber has a light misting of oil (5.3.2 (b))

Rear Motorcycle structure is corroded but structural rigidity is not significantly reduced frame (6.1.1 (c) (i))

Forks slightly corroded (2.2.2 (d) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Motorcycle structure is corroded but structural rigidity is not significantly reduced frame. (6.1.1 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Headlamp aim too high (4.1.2 (a))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Forks slightly corroded (2.2.2 (d) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Motorcycle structure is corroded but structural rigidity is not significantly reduced frame. (6.1.1 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front shock absorber seal failed and leaking oil (2.3.3)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Exhaust slightly deteriorated (7.1.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear brake binding slightly

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front suspension assembly slightly corroded. (2.3.1)

Front suspension assembly slightly corroded. (2.3.1)