2004 Nissan Cube

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Emissions not tested due to exhaust (8.2.2.2 (e))

Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting boot floor (6.2.2 (d) (i))

Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting o/s outer sill (6.2.2 (d) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing (6.2.2 (d) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Rear Exhaust system insecure (6.1.2 (a))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s and n/s rear chassis (6.1.1 (c) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front slight wheel play

Exhaust has a major leak of exhaust gases rear back box (6.1.2 (a))

Fluid leak harmful to the environment or a risk to other road users engine coolant leak (8.4.1 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front slight wheel play

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust emits visible black smoke at idle (8.2.1.2 (f))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wing within engine mount and strut mount (6.2.2 (d) (i))

Offside Rear Brake pipe excessively corroded Upto cylinder (1.1.11 (c))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Just behind the subframes swinging arm mount chassis leg (6.1.1 (c) (i))

Rear fog lamp missing (4.5.1 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material Upto wheel cylinder (1.1.11 (c))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Area around the sun frame swinging arm mount (6.1.1 (c) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Horn not working (7.7 (a) (ii))

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Brake pipe excessively corroded axle (3.6.B.2c)

Registration plate lamp not working (1.1.C.1d)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside front brake juddering slightly (3.7.A.2b)

Offside front brake juddering slightly (3.7.A.2b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)