2006 Mazda Bongo

Front Coil spring corroded Both front coil springs corroded (5.3.1 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing 215/70/15 (5.2.3 (d) (ii))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre slightly damaged/cracking or perishing 215/70/15 (5.2.3 (d) (ii))

Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Coil spring corroded Both rear coil springs corroded (5.3.1 (b) (i))

parking brake lever has little to no reserve travel

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Front Coil spring corroded Both front coil springs corroded (5.3.1 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing 215/70/15 (5.2.3 (d) (ii))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre slightly damaged/cracking or perishing 215/70/15 (5.2.3 (d) (ii))

Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Coil spring corroded Both rear coil springs corroded (5.3.1 (b) (i))

parking brake lever has little to no reserve travel

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake performance unable to be tested due to excessive corrosion (1.2.1 (g))

Emissions unable to be completed due to excessive leakage of exhaust (8.2.2.2 (e))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Brake prescribed area is excessively corroded (1.1.21 (e) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear bump stop mount area corroded and holed

Nearside Rear bump strop missing

Nearside Rear lamp cluster damaged

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis mount (5.3.6 (a) (i))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear of wheel arch (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect no pattern (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis mount (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear of wheel arch (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect no pattern (4.1.2 (c))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear bump stop missing

Nearside Rear bump stop mount corroded and holed

Nearside Rear lamp cluster damaged.

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced under wheel arch (6.1.1 (c) (i))

Nearside Rear Position lamp has a product on the lens or light source but not adversely affecting light intensity damaged but taped up (4.2.3 (b) (ii))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced under wheel arch (6.1.1 (c) (i))

all over under body and pipes covered with black under seal obscuring test

Central Front Subframe mounting prescribed area is corroded but not considered excessive prescribed area corroded ok at time of test NS & OS (5.3.6 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material under bonnet inner wing area (1.1.11 (c))

Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened inner faces pitted (1.1.14 (a) (ii))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened faces pitted (1.1.14 (a) (ii))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened inner faces pitted (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened faces pitted (1.1.14 (a) (ii))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s sill inner and outer holed excessively mark yellow (6.2.2 (d) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under bonnet hole with in prescribed area (5.3.6 (a) (i))

Nearside Rear Brake lever has insufficient reserve travel handbrake travel no reserve on NSR (1.1.2 (a))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch behind wheel marked yellow (5.3.6 (a) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill end hole and inner and out not joined (6.2.2 (d) (i))

Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill body end caps corroded away adjacent to rear seat belt mounting in prescribed area behind bumper (7.1.1 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting offside inner and outer sill hole excessively (6.2.2 (d) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch behind wheel holed marked yellow (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end holed marked yellow (5.3.6 (a) (i))

Offside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis hole by lpg mounting bracket (6.1.1 (c) (i))

Offside Upper Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill body end caps corroded away adjacent to rear seat belt mounting in prescribed area behind bumper (7.1.1 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Central Front Subframe mounting prescribed area is corroded but not considered excessive front subframe mounting corroded ok at time of test o/s and n/s (5.3.6 (a) (i))

Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened inner face pitted ok at time of test (1.1.14 (a) (ii))

Nearside Front Inner Brake pipe corroded, covered in grease or other material under bonnet inner wing (1.1.11 (c))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened faces pitted (1.1.14 (a) (ii))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened inner face pitted ok at time of test (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened faces pitted (1.1.14 (a) (ii))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced under body (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill to floor (6.1.1 (c) (i))

Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill but not holed (6.1.1 (c) (i))

Nearside Rear Exhaust mounting defective (6.1.2 (a))

Nearside Rear Upper floor to wheel arch excessive corrosion but just out side prescribed area

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Play in steering rack inner joint(s) ()

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill to floor (6.1.1 (c) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Upper Integral body structure is corroded but structural rigidity is not significantly reduced body (6.1.1 (c) (i))

Body has slight corrosion under body (6.1.B.2)

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Headlamp not working on dipped beam fault on wire (1.7.5a)

Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed (6.1.B.2)

Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed (6.1.B.2)

Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed (6.1.B.2)

Offside Rear Rear fog lamp not working (1.3.2b)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Rear Upper Exhaust system not adequately supported mount broken (7.1.1)

Body has slight corrosion under body (6.1.B.2)

Body has slight corrosion under body (6.1.B.2)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Upper Body has slight corrosion (6.1.B.2)

Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member (6.1.B.2)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under wheel arch (6.1.B.2)

Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor front and rear (6.1.B.2)

Nearside Rear Upper Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside front brake binding (3.7.B.1)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under wheel arch (6.1.B.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside front brake binding (3.7.B.1)

Offside front brake excessively fluctuating (3.7.B.3)

Body has slight corrosion under body (6.1.B.2)

Upper Body has slight corrosion (6.1.B.2)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

both front tyres perished

coolant leak

tow bar removed

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Nearside Suspension component mounting prescribed area is excessively corroded outer sill in several places (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Rear fog lamp not working (1.3.2b)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

both front tyres perished

coolant leak

nearside outer sill corroded

offside outer sill corroded

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

nearside outer sill corroded

offside outer sill corroded

nearside front inner sill

radiator lower mounting corroded

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Exhaust surface corrosion

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Rear Vehicle structure has slight corrosion (6.1.A.1)