MOT Status
ValidMileage
183,211 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Both inner sills holed in middle
Items removed from driver's view prior to test ()
Middle of outer sill holed
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis and inside upper spring mounting (5.3.6 (a) (i))
Offside Rear reflector defective or damaged by up to 50% of the reflecting surface obscured by fog light (4.8.1 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear fog light is very small
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill and sill rear closing panel holed (5.3.6 (a) (i))
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis inside upper spring mounting (5.3.6 (a) (i))
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Both inner sills holed in middle
Items removed from driver's view prior to test ()
Middle of outer sill holed
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis and inside upper spring mounting (5.3.6 (a) (i))
Offside Rear reflector defective or damaged by up to 50% of the reflecting surface obscured by fog light (4.8.1 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear fog light is very small
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))
Emissions unable to be completed (8.2.1.2 (d))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sills (6.2.2 (d) (i))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sills (6.2.2 (d) (i))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Front Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))
Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Front Power steering ram has slight seepage from a joint (2.1.5 (a))
Offside Rear chassis leg rusty
nearside and offside inner sills rusty
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Power steering ram has slight seepage from a joint (2.1.5 (a))
nearside and offside inner step sills rusting
Nearside Front Inner Power steering component has slight seepage from a component (2.1.5 (a))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Inner Power steering component has slight seepage from a component (2.1.5 (a))
Nearside Front Windscreen wiper blade missing (3.4 (b) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii))
Nearside Rear Tyre has ply or cords exposed 215/60/16 (5.2.3 (d) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front undersill blistered with rust
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front undersill blistered with rust
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y802 PTX is a 2001 Mazda Bongo in White with a 1,999cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 66.7%.
Across all 2001 Mazda Bongo models, the average MOT pass rate is 70.1% with a typical mileage of 118,444 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying Y802 PTX, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 25 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of Y802 PTX?
You can check the full history of Y802 PTX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y802 PTX registered?
Y802 PTX is a 2001 Mazda Bongo, first registered on 31 December 2001.
Is Y802 PTX safe to buy?
The MOT history for Y802 PTX shows 15 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y802 PTX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y802 PTX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.