2001 BMW C1

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Lower Engine mounting/bracket damaged but not to excess (6.1.8 (a) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Nearside Engine has slight oil leak (misting of engine oil around sensor) left side

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced light rust on underside frame braces (6.1.1 (c) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front shock absorber has light misting of stanchion (2.3.3)

centre stand actuating pin sheared and cables damaged.

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front shock absorber has light misting of stanchion (2.3.3)

Throttle operating incorrectly (6.2.1f)

centre stand actuating pin sheared and cables damaged.

Front shock absorber has light misting of stanchion (2.3.3)

Front wheel bearings are excessively rough (2.3.5b)

Front wheel bearings have excessive free play (2.3.5b)

Front shock absorber has light misting of stanchion (2.3.3)

Front shock absorber has light misting of stanchion (2.3.3)

Headlamp masks/converters fitted

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

engine mounting spacers badly corroded

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))