2001 Harley Davidson XL1200C

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Headlamp light source and lamp not compatible (4.1.4 (c))

Rear reflector missing (4.8.2 (a) (ii))

Stop lamp light intensity significantly reduced (4.3.3 (a) (ii))

Front Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Front Brake lever pivots slightly worn (3.1.3a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Motorcycle structure slightly corroded (6.1.1a)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear suspension bush has slight free play swingarm (2.4.A2a(i))

Front Brake component is excessively corroded Brake pads (3.1.5)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Front Brake lever pivots slightly worn (3.1.3a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Motorcycle structure slightly corroded (6.1.1a)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear suspension bush has slight free play swingarm (2.4.A2a(i))

Brake component is slightly corroded front brake pads (3.1.5)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake lever pivots slightly worn (3.1.3a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Motorcycle structure slightly corroded (6.1.1a)

Rear suspension bush has slight free play swingarm (2.4.A2a(i))

Front Brake lever pivots slightly worn (3.1.3a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

throttle slightly stiff but returned during test

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Motorcycle structure slightly corroded (6.1.1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Motorcycle structure slightly corroded (6.1.1a)

Motorcycle structure slightly corroded (6.1.1a)

Rear Brake disc(s) slightly pitted (3.2.A1l)

filler cap seal starting to split

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Exhaust noisy (7.1.2)

Headlamp masks/converters fitted