2000 Suzuki Bandit

Exhaust noisy (8.1.1 (a))

R/H Fork dust seal split

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Wheel alignment slightly misaligned (2.4 (a))

Direction indicator not working L/H/F (4.4.1 (a) (ii))

Direction indicator insecure L/H/F - hanging on wire (4.4.1 (c) (i))

Exhaust noisy (8.1.1 (a))

R/H Fork dust seal split

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Wheel alignment slightly misaligned (2.4 (a))

Drive chain excessively tight (6.1.7 (k) (i))

Headlamp aim too low (4.1.2 (a))

Rear Wheel spindle locking device missing (5.2.1 (d))

Registration plate does not conform to the specified requirements (0.1 (d))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Drive chain slightly tight (6.2.1d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

front tyre cracked and perrished

rear registration plate honeycomb back round

brake light works but not very bright

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

rear registration plate has a honeycombe back round but bike to old to fail

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Exhaust noisy (7.1.2)