2000 Mazda MX-5

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Offside Front Inner Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Suspension arm ball joint dust cover severely deteriorated both side upper and lower ball joints (5.3.4 (b) (i))

Nearside Front Inner Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Inner Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Chassis (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive Sill. (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Chassis. (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive Sill. (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

emissions only just met requirements on lambda by 0.1

Offside Front Tyre worn close to the legal limit (4.1.E.1)

nearside sill starting to rust

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)

rear discs corroded on faces

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

rear discs corroded on faces

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)