2000 Ford Fiesta Courier

Brake hose slightly deteriorated (3.6.B.4d)

Front Brake pad(s) wearing thin (3.5.1g)

both front tyres worn low on edges

corrosion to outer sills

corrosion to rear inner wheel arches

heavy corrosion to chassis

heavy corrosion to front,centre and rear floors

heavy corrosion to inner sills

nearside seatbelt stalk plastic cover missing

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Brake hose slightly deteriorated (3.6.B.4d)

Front Brake pad(s) wearing thin (3.5.1g)

both front tyres worn low on edges

corrosion to outer sills

corrosion to rear inner wheel arches

heavy corrosion to chassis

heavy corrosion to front,centre and rear floors

heavy corrosion to inner sills

nearside seatbelt stalk plastic cover missing

near side rear lamp lens damaged

near side seat belt catch plastic surround missing

other areas of underbody rusting and / or previously repaired

Emissions not tested (7.0)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Obligatory mirror missing (8.1.1)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Suspension component mounting prescribed area is fractured (2.4.A.3)

near side rear lamp lens damaged

near side seat belt catch plastic surround missing

other areas of underbody rusting and / or previously repaired

wiper blades split

corrosion to near side rear chassis adjacent to axle beam and several other areas of underbody / sills rusting or previously repaired

off side outer c.v.boot deteriorating

Offside Registration plate lamp not working (1.1.C.1d)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)

near side rear lamp lens damaged

near side seat belt stalk incomplete

other areas of underbody rusting

rear brakes are out of balance

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Registration plate lamp not working (1.1.C.1d)

rear brakes are out of balance

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Headlamp aim too low (1.8)

Nearside Headlamp insecure (1.7.3)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Headlamp aim too low (1.8)

Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Seat belt flexible stalk deteriorated but not likely to lead to failure under load (5.2.4a)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pipe slightly corroded (3.6.B.2c)

rear brakes slightly imbalanced

underside and sills corroded

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pipe slightly corroded (3.6.B.2c)

rear brakes slightly imbalanced

underside and sills corroded

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Registration plate lamp not working (1.1.5c)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Exhaust has a minor leak of exhaust gases (7.1.2)

footbrake travel becoming excessive

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.4.B.1)

rear brake application uneven (3.7.B.2)

front brake application uneven (3.7.B.2) DANGEROUS