2000 Sym Shark

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear brake caliper slightly worn in sliders.

Start button sticks on.

Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear brake caliper slightly worn in sliders.

Start button sticks on.

Front Brake lever is damaged and the brake cannot be readily applied (3.1.3c)

Rear Brake lever cannot be applied smoothly (3.1.3d)

Front Brake pipe slightly corroded (3.2.B2a)

Front Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Rear Brake pipe slightly corroded (3.2.B2a)

Rear Wheel alignment slightly misaligned. (2.5.1)

Horn is not a constant note (1.7.3c)

Throttle operating incorrectly (6.2.1f)

Front Brake pipe slightly corroded (3.2.B2a)

Front Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Rear Brake pipe slightly corroded (3.2.B2a)

Rear Wheel alignment slightly misaligned. (2.5.1)

Front Tyre valve stem slightly damaged (4.1.2c)

Front tyre has slight cracking in side wall.

An item not tested (Manual)

Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort (3.3.A1c)

Headlamp aim not tested (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front tyre has slight cracking in side wall.

Front Tyre worn close to the legal limit (4.1.3(i))

Rear Tyre worn close to the legal limit (4.1.3(i))

Front Roller brake test indicates a slightly juddering brake (3.3.A1b)