2000 Gilera Dna

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Footrest missing (6.2.12 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Headlamp aim too low (4.1.2 (a))

Nearside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Brake disc(s) slightly scored (3.2.A1l)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Stop lamp remains on when the brake is released (1.3.1e)

Fuel system component insecure (7.2.1b)

Fuel system component leaking (7.2.1a)

Nearside Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Wheel alignment incorrect which adversely affects the handling (2.5.1)

Rear position lamp missing (1.1.1a)

Registration plate delaminated (6.3.1.d)

Nearside Rear Rear shock absorber insecurely mounted (2.4.A.3b) DANGEROUS

Rear Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c) DANGEROUS

rev gauge fluctuation fast rpm

battery insurcure terminals loose posotive bolt fully backed out possable shorting can occure loss of electrics possable fire hazzard

center stand bolts missing.

fly wheel exposed no cover bolts missing from cover

front cover missing storage box electrics exposed and sharp edges

left mirror missing

rear caliper fixing bolt too long contacted disc grooved disc

rear seat relise cable hanging out of side of bike can foul rear wheel

wiring harness catching in steering lock to lock repaired where damage occured

Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)