2001 Ducati M750

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake pad(s) close to minimum limit both sides, very close to minimum wear limit (1.1.13 (a))

both exhaust silencers, rattle and leak slightly

Headlamp aim too low (4.1.2 (a))

Rear Position lamp not working (4.2.1 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake pad(s) close to minimum limit both sides, very close to minimum wear limit (1.1.13 (a))

both exhaust silencers, rattle and leak slightly

Brake pad(s) close to minimum limit Fronts and rear (1.1.13 (a))

Exhaust noisy (8.1.1 (a))

Nearside mirror missing

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Headlamp aim too low (4.1.2 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear rear brake master cylinder mounting bracket broken and repaired

Rear Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear rear brake master cylinder mounting bracket broken and repaired

Rear Position lamp damaged but function not impaired (4.2.1 (c) (ii))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front clutch lever bracket broken

Rear Brake component damaged but not seriously reduced in strength master cylinder (3.2.A1)

Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort (3.3.A1c)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Exhaust is leaking but is not excessively noisey (7.1.1b)

Front wheel bearings are slightly rough (2.3.5b)