2010 Mazda Bongo

Nearside Front Inner sill corroding

Nearside Front Tyre worn close to legal limit/worn on edge 1.8mm (5.2.3 (e))

Offside Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Inner sill corroding

Nearside Front Tyre worn close to legal limit/worn on edge 1.8mm (5.2.3 (e))

Offside Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Nearside Front Inner sill corroding

Offside Front Inner sill corroding

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Inner sill

Offside Front Inner sill

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Bonnet stay missing

Engine has an oil leak

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension arm (5.3.6 (a) (i))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Bonnet stay missing

Engine has an oil leak

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases REAR SILENCER (6.1.2 (a))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear HUB OIL SEAL LEAKING OIL

Rear Brake hose slightly damaged (3.6.B.4d)

Central Electrical wiring damaged, likely to cause a short WIRING UNDER VEHICLE FOR GAS CONVERSION RUBBING ON REAR FLEXIBLE BRAKE HOSE AND GENERALLY POORLY ROUTED (1.9.2b)

Front Electrical wiring inadequately supported AUXILIARY WIRING HARNESS UNDER BONNET POORLY ROUTED AND SUPORTED (1.9.2a)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear HUB OIL SEAL LEAKING OIL

Rear Brake hose slightly damaged (3.6.B.4d)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Anti-lock braking system warning lamp does not illuminate (3.4.1b)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Battery insecure (1.9.1) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

n/s/r hub oil leak

Nearside Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

n/s/r hub oil leak

Front Brake pad(s) wearing thin (3.5.1g)

offside rear brake caliper sticking