2000 Gilera Cougar

Front shock absorber has light misting of stanchion (2.3.3)

Front Brake pipe union leaking fluid (3.2.B4)

Front Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Front Roller brake test indicates a binding brake (3.3.A1a)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Nearside Rear Direction indicator damaged and function impaired (1.5.3a)

Nearside Rear Direction indicators not working (1.5.1c)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front suspension has a slightly reduced damping effect (2.3.6c)

fork stanchions pitted

front brake binding slightly

tell tales not working for high beam and indicators

Front wheel bearings have slight free play (2.3.5b)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Handlebar mounting excessively deteriorated (flexible type) (2.1.1d)

Horn not working (1.7.3a)

Front wheel bearings have slight free play (2.3.5b)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Wheel alignment slightly misaligned. (2.5.1)

Front Roller brake test indicates a binding brake (3.3.A1a)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Exhaust Manifold clamp bolt missing and sealed with sealant paste

Front Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Front Direction indicators not working (1.5.1c)

Front Front mudguard insecure (2.3.7)

Front Stop lamp deteriorated and function impaired (1.3.3a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Direction indicators not working (1.5.1c)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Drive chain worn to excess (6.2.1e)

Rear Rear suspension movement is excessively stiff (2.4.A.3b)

Rear Stop lamp deteriorated and function impaired (1.3.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain worn to excess (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Drive chain sprocket slightly worn (6.2.1e)