2000 Aprilia RS

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Position lamp not working (4.2.1 (a))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Front wheel fitted in reverse

Headlamp aim too high low & main beam (4.1.2 (a))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Exhaust noisy (8.1.1 (a))

Position lamp light intensity obviously reduced 50% reduction on rh lamp (4.2.3 (a) (i))

Rear Upper Suspension pin, bush or joint worn but not resulting in excessive movement rear of dogbone (5.3.4 (a) (i))

Front Brake binding but not excessively (1.2.1 (f))

Exhaust noisy (7.1.2)

Brake pedal has inadequate reserve travel (3.1.3b)

Plate brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.B2b)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

clutch fluid low

Steering headbearing has slight free play (2.2.2)

Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain sprocket slightly worn (6.2.1e)

Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain sprocket slightly worn (6.2.1e)

Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Horn control defective (1.7.2a)

Nearside Front Direction indicator missing (1.5.1a)

Rear Direction indicator affected by the operation of another lamp (1.5.1c)

Front Headlamp aim too high (1.6)