2000 Kymco Zing

Drive chain worn to excess (6.1.7 (c) (i))

Front Brake excessively binding (1.2.1 (f))

Headlamp aim too low (4.1.2 (a))

Headlamp insecure (4.1.1 (c))

Stop lamp not working when operated from front brake (4.3.1 (a) (ii))

Stop lamp not working when operated from rear brake (4.3.1 (a) (ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Motorcycle structure is corroded but structural rigidity is not significantly reduced steering locks and frame (6.1.1 (c) (i))

Front wheel bearing not tested due to brake binding on

Offside Direction indicator flashing more than 120 times a minute front and rear (4.4.4 (a))

Offside Front Shock absorber has a light misting of oil fork seal (5.3.2 (b))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Road spring corroded both (5.3.1 (b) (i))

exhaust corroded

number plate lamp incorrect colour

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Position lamp not working (4.2.1 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Fork yoke fractured steering stop fractured (2.2.2 (d) (i))

Both mirrors missing

Drive chain slightly loose (6.2.1d)

Outer Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Centre Front Headlamp aim too high (1.6)

Drive chain slightly loose (6.2.1d)

Front tyre sidewall perished

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1a)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Rear reflector on motorcycle missing (1.4.1)

Drive chain slightly loose (6.2.1d)

Front tyre sidewall perished

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1a)

Drive chain slightly loose (6.2.1d)