2000 Kymco Cobra Cross

Front Valve stem slightly damaged (5.2.3 (j))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords badly perished sidewalls (5.2.3 (d) (i))

Front Valve stem slightly damaged (5.2.3 (j))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Lower Rear suspension bush deteriorated but not excessively (2.4.A2a(i))

Nearside Brake lever is bent but brake can still be readily applied (3.1.3c)

Steering movement slightly stiff (2.2.1b)

Headlamp aim too high (1.6)

Lower Rear suspension bush deteriorated but not excessively (2.4.A2a(i))

Nearside Brake lever is bent but brake can still be readily applied (3.1.3c)

Steering movement slightly stiff (2.2.1b)

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear Tyre worn close to the legal limit (4.1.3(i))

Front Tyre worn close to the legal limit (4.1.3(i))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear shock absorber has a light misting (2.4.A.1c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Exhaust noisy (7.1.2)

Rear shock absorber has a light misting (2.4.A.1c)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear shock absorber has a light misting (2.4.A.1c)