2000 Gilera Cougar

Exhaust noisy (8.1.1 (a))

Direction indicator obviously incorrectly positioned both rear inner (4.4.3 (a))

Drive chain excessively tight (6.1.7 (k) (i))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Headlamp insecure (4.1.1 (c))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

gear linkage worn

slight front brake bind

sprocket bolt lock tab not against bolt

All direction indicators obviously incorrectly positioned (4.4.3 (a))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Headlamp insecure (4.1.1 (c))

Riders seat insecure (6.2.5 (a) (ii)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Registration plate insecure (0.1 (a))

gear linkage worn

sprocket bolt lock tab not against bolt

Rear Rear suspension bearing has slight free play (2.4.A2a(i))

Front Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front wheel bearings are excessively rough (2.3.5b)

Rear Brake pedal has inadequate reserve travel (3.1.3b)

Rear Rear suspension bearing has slight free play (2.4.A2a(i))

Drive chain excessively loose (6.2.1d)

Front Rear suspension bearing has excessive free play (2.4.A2a(i))

Front wheel bearings are excessively rough (2.3.5b)

Front wheel bearings have excessive free play (2.3.5b)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Exhaust excessively deteriorated (7.1.1a)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim too low (1.6)

Headlamp main beam affected by the operation of another lamp (1.2.2c)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Wheel spoke cracked. (4.2.1b)

Rear wheel bearings have excessive free play (2.4.A.2c)

Nail in rear tyre

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain worn to excess (6.2.1e)

Headlamp aim too high (1.6)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Wheel spoke cracked. (4.2.1b)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear suspension bearing has slight free play (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Wheel alignment slightly misaligned. (2.5.1)

headlamp lens out of line