2000 Gilera Runner

Front Brake lever insecure (3.1.2a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Front suspension has inadequate damping effect. (2.3.6c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Headlamp insecure (1.2.3b)

Horn not working (1.7.3a)

Offside Rear Direction indicator not working (1.5.1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear reflector on motorcycle missing (1.4.1)

Rear wheel rotation likely to be impeded (6.2.1b)

Riders seat insecure (6.2.1a)

Motorcycle structure adversely modified (6.1.1b) DANGEROUS

Exhaust is leaking and excessively noisey (7.1.1b)

Headlamp aim too high (1.6)

Rear Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Rear Wheel has an excessively distorted bead rim. (4.2.2)

Rear position lamp damaged and function impaired (1.1.1b)

Front suspension assembly excessive wear or free play in a front suspension component (2.3.4) DANGEROUS

Front suspension has excessive stiffness in the suspension movement. (2.3.6b) DANGEROUS

Steering movement excessively 'notchy' with the wheel raised (2.2.1b) DANGEROUS

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear suspension bush has excessive free play (2.4.A2a(i))

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Front Brake lever cannot be applied smoothly (3.1.3d)

Front Direction indicators affected by the operation of another lamp (1.5.1c)

Front Headlamp insecure (1.2.3b)

Offside Outer Rear Direction indicator damaged and function impaired (1.5.3a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Rear suspension bush has slight free play (2.4.A2a(i))