2000 Yamaha Xv 250 S

Front fork stanchion pitted

Brake pedal is positioned so that the brake cannot be readily applied adjusted (1.1.2 (d))

Front fork stanchion pitted

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Front Brake fluid contaminated (1.8 (a))

Horn not working (7.7 (a) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Headlamp switch does not immediately illuminate all dipped beam headlamps (4.1.3 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii))

Front Wheel corroded but not to excess (5.2.2 (c) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Wheel corroded but not to excess (5.2.2 (c) (i))

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Wheel spoke slightly corroded. (4.2.1b)

Headlamp insecure (1.2.3b)

Inner Front shock absorber seal failed and leaking oil (2.3.3)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Wheel spoke slightly corroded. (4.2.1b)

Rear Wheel spoke slightly corroded. (4.2.1b)

Brake pedal is positioned so that the brake cannot be readily applied (3.1.3c)

Front Inner Front shock absorber seal failed and leaking oil (2.3.3)

Headlamp insecure (1.2.3b)

Horn not loud enough to be heard by another road user (1.7.3a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Wheel spoke slightly corroded. (4.2.1b)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Wheel spoke slightly corroded. (4.2.1b)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Front shock absorber seal failed and leaking oil (2.3.3)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Wheel spoke slightly corroded. (4.2.1b)

front tyre cracking