2000 Honda CB250

Front & rear suspension operation stiff

Drive chain horseshoe locking device incorrectly fitted Fitted backwards (6.1.7 (j) (i))

Rear Brake back plate insecure Torque arm slit pin missing (1.1.14 (d))

Rear Position lamp not working (4.2.1 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front & rear suspension operation stiff

Front Brake excessively binding (1.2.1 (f))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

both tyres under inflated

Front Tyre perished in tread.

Front Tyre worn close to the legal limit (5.2.3 (e))

Drive chain slightly loose (6.1.7 (c) (i))

Headlamp aim too low (4.1.2 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake binding but not excessively (1.2.1 (f))

Rear Brake binding but not excessively (1.2.1 (f))

Front Exhaust is leaking but is not excessively noisey (7.1.1b)

Headlamp masks/converters fitted

Headlamp masks/converters fitted

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain excessively tight (6.2.1d)

Front Brake disc(s) excessively worn (3.2.A1l)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Roller brake test indicates a binding brake (3.3.A1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Headlamp aim beam image kick up to the offside (1.6)

Front Tyre worn close to the legal limit (4.1.3(ii))