MOT Status
ExpiredMileage
175,805 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Fluid leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
plastic sills covers fitted
Central Exhaust has a major leak of exhaust gases exhaust flexi (7.1.2)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Outer Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Headlamp not working on dipped beam light output (1.7.5a)
Offside Front Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
Parking brake lever has little reserve travel (3.1.6b)
plastic sills covers fitted
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Lower Anti-roll bar linkage has slight play in a pin bearing (2.4.G.2)
Offside Rear Lower Anti-roll bar linkage has slight play in a pin bearing (2.4.G.2)
Nearside Rear Rear position lamp(s) not working (1.1.A.3b)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Registration plate lamp not working (1.1.C.1d)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Lower Anti-roll bar linkage has slight play in a pin bearing (2.4.G.2)
Offside Rear Lower Anti-roll bar linkage has slight play in a pin bearing (2.4.G.2)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened Nearside and offside (3.5.1i)
Offside Obligatory mirror missing (8.1.1)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened Nearside and offside (3.5.1i)
Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Oil leak
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Oil leak
Under-trays fitted obscuring some underside components
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Battery insecure (1.9.1)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Windscreen washer provides insufficient washer liquid (8.2.3)
Both rear tyres heavly cracked and perished
Could not access engine compartment
Nail in offside front tyre
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Under-trays fitted obscuring some underside components
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear tyres worn on inner and outer edges (possible tracking fault)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside front brake binding (3.7.B.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside front brake binding (3.7.B.1)
Front Brake pad(s) wearing thin (3.5.1g)
Rear tyres worn on inner and outer edges (possible tracking fault)
Centre Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)
Nearside Inner Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Direction indicator incorrect colour (1.4.A.2f)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp aim too high (1.8)
Offside Inner Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
brake pedal anti slip slightly worn
slight corrosion centre to rear exhaust
Centre Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)
Nearside Inner Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
brake pedal anti slip slightly worn
slight corrosion centre to rear exhaust
Nearside Headlamp aim too high (1.8)
Offside Rear Rear fog lamp missing (1.3.2a)
Rear fog lamp not working (1.3.2b)
Front Brake pad(s) wearing thin (3.5.1g)
tappley tested limited slip diff
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
X152 VRL is a 2008 Mazda Bongo in Black with a 1,990cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 62.5%.
Across all 2008 Mazda Bongo models, the average MOT pass rate is 66.5% with a typical mileage of 139,328 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying X152 VRL, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 18 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of X152 VRL?
You can check the full history of X152 VRL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was X152 VRL registered?
X152 VRL is a 2008 Mazda Bongo, first registered on 23 October 2008.
Is X152 VRL safe to buy?
The MOT history for X152 VRL shows 24 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does X152 VRL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on X152 VRL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.