2006 Superbyke Rbp 125

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Nearside Front Footrest insecure (6.2.1a)

Nearside Rear Footrest insecure (6.2.1a)

Offside Rear Footrest missing (6.2.1a)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear wheel bearings have excessive free play (2.4.A.2c)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Drive chain worn but not considered excessive (6.2.1e)

Front Fairings insecure but not likely to impede the steering (2.1.2e)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Steering control chaffing between components and not interfering with free movement of steering (2.1.2a)

Front position lamp flickers when tapped lightly by hand (1.1.3c)

Headlamp aim too high (1.6)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear suspension bush has excessive free play (2.4.A2a(i))

Steering headbearing has excessive free play (2.2.2)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Steering control chaffing between components and not interfering with free movement of steering (2.1.2a)