2016 Rieju RS

Drive chain worn but not considered excessive Slight tight spots (6.1.7 (c) (i))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Headlamp aim unable to be tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Horn not working (7.7 (a))

Drive chain worn but not considered excessive Slight tight spots (6.1.7 (c) (i))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Front Brake lever insecure LOCK NUT MISSING OFF THE PIVOT BOLT (1.1.2 (e) (i))

Front Headlamp aim too high (4.1.2 (a))

Front Steering headbearing has excessive wear or free play TOP YOKE MAIN NUT INSECURE (2.2.2 (f) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Front Throttle operating incorrectly ENGINE REVING ON FULL RIGHTHAND LOCK (6.2.7 (a) (i))

Nearside Front Brake disc contaminated (1.1.14 (b))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Drive chain excessively loose (6.1.7 (c) (i))

Rear Drive chain worn to excess (6.1.7 (c) (i))

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Offside Rear Exhaust noisy (8.1.1 (a))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Exhaust noisy (8.1.1 (a))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Headlamp aim too high BEAM ADJUSTED DURING TEST (4.1.2 (a))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Exhaust noisy (8.1.1 (a))

Front Brake component modification unsafe BRAKE DISC MOUNTING NOT SAFE (1.1.21 (d) (i))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Headlamp aim projected beam image obviously incorrect NO PATTERN AT ALL (4.1.2 (c))

Rear Drive chain horseshoe locking device incorrectly fitted FITTED BACKWARDS (6.1.7 (j) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake fluid below minimum mark (1.1.10 (d) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Exhaust noisy (8.1.1 (a))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Headlamp not working on main beam (4.1.1 (a) (ii))

Front Wheel excessively distorted 4MM RUNOUT (2MM THE LIMIT) (5.2.2 (c) (i))

Rear Brake indicates excessive fluctuation of brake effort BRAKE DISC WARPED (1.2.1 (e))

Rear Drive chain horseshoe locking device incorrectly fitted FITTED BACKWARDS (6.1.7 (j) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Exhaust noisy (8.1.1 (a))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))