2012 Honda Ww 125-D

Fork yoke deformed but serviceable (2.2.2 (d) (i))

Front Fork yoke deformed but serviceable (2.2.2 (d) (i))

Rear Brake lining(s) close to minimum limit (1.1.13 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear brakes need adjustment

Horn not working (7.7 (a))

Rear brakes need adjustment

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Front shock absorber has light misting of stanchion (2.3.3)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Centre stand seized.

Steering movement slightly 'notchy' (2.2.1b)

Front Brake disc(s) excessively worn (3.2.A1l)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Floor brake test indicates a binding brake (3.3.C2c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Centre stand seized.

Steering movement slightly 'notchy' (2.2.1b)

Drive

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

Steering movement slightly 'notchy' (2.2.1b)