MOT Status
ValidMileage
130,021 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Fluid leak, but not excessive power steering rack (8.4.1 (a) (i))
Nearside Brake pipe corroded, covered in grease or other material front to back (1.1.11 (c))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Front Outer Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Rear reflector missing (4.8.2 (a) (ii))
Nearside Rear Upper Brake pipe excessively corroded to flexi (1.1.11 (c))
Offside Front Headlamp reflector seriously defective (4.1.1 (b) (ii))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Outer Brake pipe excessively corroded (1.1.11 (c))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Rear Brake pipe excessively corroded left to right (1.1.11 (c))
Fluid leak, but not excessive power steering rack (8.4.1 (a) (i))
Nearside Brake pipe corroded, covered in grease or other material front to back (1.1.11 (c))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Front Brake pipe corroded, covered in grease or other material and rear (1.1.11 (c))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced and rear (6.1.1 (c) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b))
Offside Front Power steering component leaking (2.1.5 (a))
Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Front Brake pipe corroded, covered in grease or other material and rear (1.1.11 (c))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced and rear (6.1.1 (c) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Emissions unable to be completed (8.2.2.2 (e))
Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users (8.2.2.2 (c)) DANGEROUS
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Gearbox mounting defective ()
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Power steering component has slight seepage from a component (2.1.5 (a))
Prop shaft joint worn, but not excessively (6.1.7 (c) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Passenger seat(s) missing at time of test ()
Suspension component corroded but not seriously weakened all (5.3.3 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive all (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Suspension arm pin or bush worn but not resulting in excessive movement upper and lower wishbones all bushes (5.3.4 (a) (i))
Nearside Rear leaf spring slightly splayed
Offside Rear Leaf spring shackle bracket corroded but not seriously weakened (5.3.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Exhaust has a minor leak of exhaust gases under bonnet (6.1.2 (a))
Nearside Front Tyre slightly damaged/cracking or perishing cut to outer sidewall (5.2.3 (d) (ii))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Position lamp not working (4.2.1 (a))
Rear fog lamp does not face the rear (4.5.4 (a))
Brake pipe slightly corroded n/s front brake pipes (3.6.B.2c)
Nearside Front Shock absorber has a slightly worn bush (2.7.4)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Shock absorber has a slightly worn bush (2.7.4)
Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Vehicle structure has slight corrosion (6.1.B.2)
advise gear box mounting worn
n/s front tyre worn badly outer edge
advise n/s front inner pad worn
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Mitsubishi L200?
Based on 1,362,678 MOT tests across 122,130 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WP61 TEV is a 2012 Mitsubishi L200 in White with a 2,477cc diesel engine. This vehicle has been through 18 MOT tests with a personal pass rate of 72.2%.
Across all 2012 Mitsubishi L200 models, the average MOT pass rate is 75.9% with a typical mileage of 78,320 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mitsubishi L200 fails its MOT is brake pipe excessively corroded, accounting for 34,324 recorded failures. If you're considering buying WP61 TEV, it's worth having these areas checked by a mechanic before committing.
The Mitsubishi L200 typically stays on UK roads for around 29 years. At 14 years old, this Mitsubishi L200 is still in the earlier part of its expected life.
Frequently Asked Questions
How do I check the history of WP61 TEV?
You can check the full history of WP61 TEV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WP61 TEV registered?
WP61 TEV is a 2012 Mitsubishi L200, first registered on 13 February 2012.
Is WP61 TEV safe to buy?
The MOT history for WP61 TEV shows 18 tests with a 72.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WP61 TEV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WP61 TEV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.