2006 Lexus RX400 H SE CVT

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Suspension arm ball joint has slight play both side (5.3.4 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Suspension arm ball joint has slight play both sides (5.3.4 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Lower Suspension arm ball joint has slight play both sides (5.3.4 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced surface rust (6.1.1 (c) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Vehicle structure is corroded but structural rigidity is not significantly reduced light surface rust (6.1.1 (c) (i))

Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

both rear tyres badly cracking around inner edge but no cords exposed

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

both rear tyres badly cracking around inner edge but no cords exposed

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

front no plate cracked