2004 Fiat Motorhome

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive undrr bonnet (5.3.6 (a) (i))

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive welded and undersealed (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive subframe mounting (5.3.6 (a) (i))

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive chassis under bonnet (5.3.6 (a) (i))

both n/s and o/sjacking points are corroded but not to excess all underneath has been heavily undersealed o/s/f has been welded and undersealed

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Suspension spring mounting prescribed area is inadequately repaired rear spring hanger area (5.3.6 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear hanger area (5.3.6 (a) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive chassis under bonnet (5.3.6 (a) (i))

Offside Front inner wing has been welded and underseal

all brake pipes are covered in underseal

both n\s and o/s jacking points are corroded but not to excess or out of prescribed areas

various repairs are all covered in underseal

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Arch/Jacking Point Area (5.3.6 (a) (i))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner Wheel Arch (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Arch/Jacking Point Area (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner Wheel Arch - x2 (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area is inadequately repaired Inner Wheel Arch (5.3.6 (a) (i))

Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner Wheel Arch/Shock Mount Area (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Out Rigger (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material o/s and n/s (1.1.11 (c))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material o/s and n/s (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material o/s and n/s (1.1.11 (c))

Front Position lamp not working o/s and n/s (4.2.1 (a) (ii))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Headlamp aim too low (4.1.2 (a))

Rear fog lamp not working (4.5.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material o/s and n/s (1.1.11 (c))

Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step (5.3.6 (a) (i))

Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))

Driver's view to the front outside the swept area of the windscreen wipers restricted by an obstruction wipers (3.1 (a) (i))

Areas of corrosion to underside of vehicle

Offside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing (2.4.A.3)

Nearside Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Direction indicator has less than 50% of the light sources illuminating both rears (1.4.A.2c)

Nearside Inner Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside front brake grabbing slightly (3.7.A.2b)

Fuel tank leaking (7.2.3)

Offside Rear fog lamp not working (1.3.2b)

Nearside front brake grabbing slightly (3.7.A.2b)

Heavy knock from rear....No reason found

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)