2004 Honda CBR125

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim too high (4.1.2 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Tyre worn close to the legal limit on 1mm. (5.2.3 (e))

n/s/f footrest rubber deteriorated.

slight movement in rear sprocket cush rubbers.

cant see front brake fluid level.

cant see front brake fluid level.

Riders seat insecure (6.2.5 (a) (ii))

Nearside Rear Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

drive chain adjustment near maximum

Nearside Rear Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

drive chain adjustment near maximum

Riders seat insecure (6.2.1a)

Drive chain slightly loose (6.2.1d)

Rear Registration plate character(s) likely to be misread (6.3.4b)

Front Roller brake test indicates a binding brake (3.3.A1a) DANGEROUS

Rear Footrest missing (6.2.1a) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) DANGEROUS

Nearside Drive chain excessively loose (6.2.1d) DANGEROUS

Offside Handlebar deformed (2.1.1b) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Numberplate and front tyre just meet legal requirements

Centre Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Rear Drive chain excessively loose (6.2.1d)

Rear Footrest missing (6.2.1a) DANGEROUS

Nearside Front Headlamp aim too high (1.6)

Numberplate and front tyre just meet legal requirements

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Offside Brake lever attachment screws loose (3.1.2b)

Rear Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))