2000 Mazda MPV

Vehicle under sealed floor and components

Front radiator mount corroded

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Emissions unable to be completed belt snapped during test (8.2.1.2 (d))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Front radiator mount corroded

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

General under body surface corrosion.

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Tyre slightly damaged/cracking or perishing All four (5.2.3 (d) (ii))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Tyre slightly damaged/cracking or perishing All four (5.2.3 (d) (ii))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Position lamp has a product on the lens or light source which shows white light to the rear (4.2.3 (b) (ii))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))

Advise brake check

Advise front brake sticking

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Advise brake check

Advise front brake sticking

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Headlamp aim too low (1.8)

Offside Front Headlamp aim too low (1.8)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Windscreen wiper does not clear the windscreen effectively (8.2.2)