2005 Jaguar X-type

Nearside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii))

Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Engine bay covers fitted obscuring some components

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Rear Coil spring corroded BOTH sides (5.3.1 (b) (i))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front disc worn

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Front disc worn

Nearside Headlamp aim too low (1.8)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp aim too low (1.8)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Windscreen wiper blade insecure (8.2.2)

Oil leak

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)