2014 Kymco Dj

1x exhaust silencer bolt missing

Front Outer Brake pad(s) close to minimum limit (1.1.13 (a))

Offside Shock absorber has a light misting of oil fork seal (5.3.2 (b))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Engine mounting/bracket damaged or deteriorated resulting in excessive movement excessive wear and movement in engine mounts (6.1.8 (a) (i))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Outer Brake pad(s) close to minimum limit (1.1.13 (a))

Headlamp light intensity reduced headlamp lenses cloudy (4.1.4 (a))

Offside Shock absorber has a light misting of oil fork seal (5.3.2 (b))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Headlamp light intensity reduced (4.1.4 (a))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Riders seat slightly loose (6.2.5 (a) (ii))

Exhaust has a major leak of exhaust gases major leak where exhaust joins engine (6.1.2 (a))

Offside Rear Pillion seat with a defective supporting structure pillion foot area insecure + sharp edges (6.2.6 (a) (i))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Handlebar so insecure it is likely to become detached movement between handlebars & front forks (sideways movement) (2.2.1 (b) (ii)) DANGEROUS

Stop lamp does not illuminate by the operation of both brake controls not working on application of rear brake (4.3.2 (a) (iii)) DANGEROUS

Front Brake binding but not excessively (1.2.1 (f))

Front Outer Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Upper Shock absorber has a slightly worn bush (5.3.2 (c))

some plastic underbody /engine covers have rough edges

Headlamp light intensity reduced (4.1.4 (a))

Headlamp slightly discoloured (4.1.4 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

REAR SHOCK HAS SLIGHT LOSS OF DAMPING

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

REAR SHOCK HAS SLIGHT LOSS OF DAMPING

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Tyre fouling another component RUBBING ON REAR HUGGER (5.2.3 (f))

Rear noise from wheel when rotating