2003 Nissan Cube

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis near top spring mount (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases welded joint (6.1.2 (a))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

heavy undersealed in places

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength hole in floor (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch holed (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength hole in floor (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch holed. 2 holes (5.3.6 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis near top spring mount (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases welded joint (6.1.2 (a))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

heavy undersealed in places

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

UNDER BODY SURFACE CORROSION HEAVILY UNDERSEALED

HEAVY UNDER BODY SURFACE CORROSION

Front Service brake excessively fluctuating (1.2.1 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

HEAVY UNDER BODY SURFACE CORROSION

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. front and rear (1.2.1 (b) (i))

underbody surface corrosion

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Inner Tyre has a cut but not deep enough to reach the ply or cords sidewall (5.2.3 (d) (i))

Offside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Side repeater incorrect colour (4.4.3 (a))

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Side repeater incorrect colour (4.4.3 (a))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Inner Tyre has a cut but not deep enough to reach the ply or cords sidewall (5.2.3 (d) (i))

Offside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

centre and rear exhaust is deteriorated and blowing slightly

n/s/r tyre is going out of shape on the inside edge

o/s/r tyre is perished

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) not working (1.1.A.3b)

centre and rear exhaust is deteriorated and blowing slightly

n/s/r tyre is going out of shape on the inside edge

o/s/r tyre is perished

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Stop lamp not working (1.2.1b)

Rear fog lamp not working (1.3.2b)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

both front brake disc inner faces corroded

Offside Stop lamp not working (1.2.1b)

fog lamp tell tale poorly positioned

fuel filler neck sealing surface corroded

Front Brake pad(s) wearing thin (3.5.1g)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

n/s/f tyre wearing slightly outer egde

damage to tread of n/s/f tyre