2017 Bullit Hunt S 125

Exhaust noisy (8.1.1 (a))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Oil leak from left side engine cover

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Wheel has a slightly distorted bead rim rear rim rightside bead edge (5.2.2 (c) (i))

front mudguard slightly loose

right switch block slightly loose

Headlamp aim projected beam image obviously incorrect not correct headlight beam pattern (4.1.2 (c))

Exhaust noisy (8.1.1 (a))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Oil leak from left side engine cover

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Wheel has a slightly distorted bead rim rear rim rightside bead edge (5.2.2 (c) (i))

front mudguard slightly loose

right switch block slightly loose

Exhaust system insecure (6.1.2 (a))

Front Brake disc contaminated (1.1.14 (b))

Front Brake pad(s) contaminated (1.1.13 (b))

Chain guard missing ()

Exhaust noisy (8.1.1 (a))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

front mud guard slightly loose at bracket

gear shift lever loose

handle bars slightly bent

oil leak left side cover of engine

Brake pivot has restricted free movement rear brake pedal fouling on swing arm (1.1.15 (e))

Front Brake excessively binding (1.2.1 (f))

Rear Brake excessively binding (1.2.1 (f))

Chain guard missing ()

Exhaust noisy (8.1.1 (a))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

front mud guard slightly loose at bracket

gear shift lever loose

handle bars slightly bent

oil leak left side cover of engine

rear disc rubbing on swing arm bracket causing binding of rear brake

split pin or locking device missing from rear brake pivot bolt

Front Brake disc significantly and obviously worn front disc worn/excess run out (1.1.14 (a) (i))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Brake pedal pivot has excessive free play rear brake pedal pin not sured correctly pin and clip fitted wrongly (1.1.1 (b))

Rear Footrest missing no pillion pegs fitted (6.2.12 (a))

Rear reflector missing (4.8.2 (a) (ii))

Wheel alignment incorrect which adversely affects the handling wheel alignment no correct causing handling issue due to mis alignment of front and rear wheels (2.4 (a))

Rear Brake hose connection leaking brake line loose at banjo bolt (excessively loose at bolt) (1.1.12 (c)) DANGEROUS

Riders seat insecure (6.2.5 (a) (ii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

clutch lever loose

exhaust loose at clamp

gear shift pedal loose

rear mud guard loose at mounts

top and bottom rear shock bolts missing washers at pivots

front brake master clamp missing 1 fastener bolt at handle bar (front brake lever loose at clamp)

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear rear brake performance lower than a average similar size and weight bike

Wheel alignment slightly misaligned (2.4 (a))

Drive chain excessively loose (6.1.7 (c) (i))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Wheel alignment slightly misaligned (2.4 (a))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Brake pedal has insufficient reserve travel (1.1.2 (a))

Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Nearside Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Position lamp not working (4.2.1 (a))