MOT Status
ValidMileage
11,221 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Coolant leak at pump ()
Drive chain slightly loose (6.2.1d)
Front brake lever has little reserve travel
Oil leak ()
Clutch lever shortened. (6.2.1g)
Lower Rear suspension bush has slight free play (2.4.A2a(i))
drive chain corroded
Brake lever is so short and the brake cannot be readily applied (3.1.3c)
Rear reflector on motorcycle missing (1.4.1)
drive chain corroded
Clutch lever shortened. (6.2.1g)
Lower Rear suspension bush has slight free play (2.4.A2a(i))
How Reliable is the Aprilia SX 50 MY06?
Based on 1,931 MOT tests across 264 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WK10 CNC is a 2010 Aprilia SX 50 MY06 in Black with a 50cc petrol engine. This vehicle has been through 6 MOT tests with a personal pass rate of 83.3%.
Across all 2010 Aprilia SX 50 MY06 models, the average MOT pass rate is 67.5% with a typical mileage of 11,922 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Aprilia SX 50 MY06 fails its MOT is reflector on motorcycle missing, accounting for 101 recorded failures. If you're considering buying WK10 CNC, it's worth having these areas checked by a mechanic before committing.
The Aprilia SX 50 MY06 typically stays on UK roads for around 20 years. At 16 years old, this Aprilia SX 50 MY06 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of WK10 CNC?
You can check the full history of WK10 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WK10 CNC registered?
WK10 CNC is a 2010 Aprilia SX 50 MY06, first registered on 9 July 2010.
Is WK10 CNC safe to buy?
The MOT history for WK10 CNC shows 6 tests with a 83.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WK10 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WK10 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.