2008 Sym Jet

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Reduced rear suspension damping.

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Front Wheel spindle loose (5.2.1 (c) (i))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Reduced rear suspension damping.

Headlamp aim too low (4.1.2 (a))

Headlamp not working on main beam (4.1.1 (a) (ii))

Front Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Reduced rear suspension damping.

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front fork gaitors split.

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

number cracked

Exhaust noisy (7.1.2)

Nearside of twin rear lights not working, offside ok and both brake lights ok.

Rear Tyre worn close to the legal limit (4.1.3(ii))

Throttle operating incorrectly (6.2.1f)

Exhaust noisy (7.1.2)

Nearside of twin rear lights not working, offside ok and both brake lights ok.

Rear Tyre worn close to the legal limit (4.1.3(ii))